Euphoric Arp Lead
Sounds like: A bright, driving arpeggio that builds towards a peak-time moment.
Sound type: arp · Genre: Melodic Techno, Trance, Breakbeat / Jungle · Style: driving, euphoric arpeggiated lead
A driving, euphoric arpeggiated lead built from a wide chord run through the arpeggiator at speed, with the filter opened up bright: an anthemic, building sound suited to a melodic peak-time moment.
Open this patch in the interactive Patchpad
Digitone II
Exact match: Arpeggiated wide triad lead
SYN page 1
- ALGO: 1
- RATIO C: 1.00
- MIX: -64
SYN page 2 · Operators A & B
FLTR page 1 · Multi-mode
- FREQ: 85
- RESO: 35
- TYPE: 0 (LP)
AMP page
- ATK: 0
- DEC: 30
- SUS: 90
- REL: 60
- MODE: ADSR
ARPEGGIATOR menu
- MODE: UP
- SPEED: 1/16
- RANGE: 2
- LEN: 8
- N.LEN: 60
Hold a wide triad (root/third/fifth). RANGE 2 automatically adds the octave-up repeat that gives the pattern its anthemic reach, and the bright FLTR FREQ keeps the whole run cutting through a mix. ALGO 1 routes operator A (and B) into carrier C, so LEV (A) and LEV (B) are set to 0 on SYN page 2 and MIX is -64 (the X output, C only): that leaves C a plain, unmodulated carrier.
Syntakt
Approximation: No arpeggiator: SY CHIP note-cycling stands in
SYN — SY CHIP
- WAVE: Saw (a plain static waveform)
- TUNE: 0
- SPD: 1/16
- DEC: 40
- OF2: 4
- OF3: 7
- OF4: 12
- OVER: 15
FLTR PAGE 1
- FREQ: 85
- RESO: 35
- TYPE: Lowpass
AMP PAGE 1
- ATK: 0
- DEC: 30
- SUS: 90
- REL: 60
AMP PAGE 2
SY CHIP is an Analog Drum machine, so it runs on track 9, 10 or 11.
Tonverk
Exact match: Detuned saws through a two-octave arpeggio
SRC machine (Func + Src)
SRC page 1 · Oscillator 1
- TUNE: 0
- LEV: 100
- POS: 0
- SLOT: HS Saw (Factory Library › 6-Wavetables)
SRC page 2 · Oscillator 2
- DTUN: +9
- LEV: 100
- POS: 0
- SLOT: HS Saw (Factory Library › 6-Wavetables)
FLTR page 1 · Multimode
- FREQ: 85
- RESO: 35
- TYPE: 0 (low-pass)
AMP setup (Func + Amp)
AMP page
- ATK: 0
- DEC: 30
- SUS: 90
- REL: 60
ARPEGGIATOR menu (Arp)
- Arpeggiator: ON (Func + Arp)
- MODE: UP
- SPEED: 1/16
- RANGE: 2
- ARP LENGTH: 8
- N.LEN: 60
Two lightly detuned saws arpeggiated up over two octaves at sixteenths. Open FREQ gradually, or lock it rising across a phrase, for the build. The arpeggiator plays while a note is held: on the sequencer, give a trig a long LEN, or put several notes on it with Step Edit for a chord.
Novation Summit
Exact match: Arpeggiated wide triad lead
OSCILLATOR 1
OSCILLATOR 2
- WAVE: Sawtooth
- RANGE: 8'
- FINE: +9 cents
MIXER
FILTER
- SHAPE: LP
- FREQUENCY: 85
- RESONANCE: 35
AMP ENVELOPE
- ATTACK: 0
- DECAY: 30
- SUSTAIN: 90
- RELEASE: 60
ARPEGGIATOR
- Type: Up
- Rhythm: 3
- Octaves: 2
- Gate: 90
- SyncRate: 16th
MODULATION MATRIX
- Slot 1 sA: ModWheel
- Slot 1 Destin: FiltFreq
- Slot 1 Depth: +30
A detuned two-oscillator saw (FINE +9 cents) thickens the tone before it even reaches the arpeggiator. Octaves 2 doubles a held triad up an octave for the anthemic reach; Gate 90 keeps notes near-legato for a smooth, driving run rather than a stuttery one. Live control: ride the panel Arp Octave knob for the build width; the Mod Wheel opens the filter through Mod Matrix slot 1.
Arturia MiniFreak
Exact match: Arpeggiated wide triad lead
OSCILLATOR · Osc 1
- TYPE: BasicWaves
- WAVE (Morph): 50 (pure sawtooth)
- TIMBRE (Sym): 0
- SHAPE (Sub): 0
- VOLUME: 100
ANALOG FILTER
- TYPE: Low Pass
- CUTOFF: 85
- RESONANCE: 35
ENVELOPE
- ATTACK: 0
- DECAY: 30
- SUSTAIN: 90
- RELEASE: 60
ARPEGGIATOR
- Mode: Up
- Octave Range: 2
- Gate: 90%
- Time Division: 1/16
Osc 1 is BasicWaves with Morph at 50 (pure sawtooth): the Morph knob runs from a square (0) through a sawtooth (50) to a double sawtooth an octave up (100), Sym only changes the pulse width below 50, and Sub adds a sine an octave down (0 here). Same Mode Up / Octave Range 2 combination as the other real-arp synths: hold a triad, let the arpeggiator add the octave-up repeat automatically. Values are on MiniFreak's native 0-100 scale.
Dreadbox Typhon
Approximation: No arpeggiator: hand-programmed step sequencer
FRONT PANEL
- WAVE: ~3 o'clock (VCO2 saw only)
- TUNE 2: Fully anticlockwise (0: VCO2 at the same pitch as VCO1)
- CUTOFF: ~5 o'clock (~85%)
- RESON: ~5 o'clock (~35%)
FILTER ADSR
- ATTACK: 0
- DECAY: 30
- SUSTAIN: 90
- RELEASE: 60
AMP ADSR
- ATTACK: 0
- DECAY: 30
- SUSTAIN: 90
- RELEASE: 60
NOTE SEQUENCER (SQNCR button)
- LENG (shift page): 8
- DVS (shift page): 8 (the manual example uses 8; match your tempo by ear)
- PROB (shift page): 100
- SWI (shift page): 50 (no swing)
- STEP / OCV / NOTE / GATE / VEL: Steps 1-8: C, E, G, C (OCV +1), C, E, G, C (OCV +1): a triad plus octave, repeated
- GATE: 90 (0 = rest, maximum = tie)
Typhon has no arpeggiator, but it has a note sequencer (SQNCR button: 1 to 32 steps over a 6-octave range, with per-step octave, note, gate, velocity, plus probability, division and swing). Program the pattern's notes directly instead of holding a chord. Steps 1-8: C, E, G, C (OCV +1), C, E, G, C (OCV +1): a triad plus octave, repeated. The Filter and Amp ADSR and the front-panel settings shape each note.
ASM Hydrasynth Desktop
Exact match: Arpeggiated wide triad lead
OSCILLATOR 1
FILTER 1
- TYPE: LP Ldr12
- CUTOFF: 85.0
- RESONANCE: 35.0
ENVELOPE 2
- ATTACK: 0 ms
- DECAY: 250 ms
- SUSTAIN: 90.0
- RELEASE: 400 ms
ARPEGGIATOR
- Mode: Up
- Octave: 2
- Gate: 90%
- Division: 1/16
Patchpad is a free reference of drum patterns, synth patches and reminders, written for a selection of real hardware.